MALTA DYNAMICS 18" D-RING EXTENDER

• Offers a quick and easy way to add length to the back D-Ring of harnesses
• Users can more easily attach their lanyards while wearing a harness
• Snap hook component attaches directly to the dorsal D-Ring of the harness
• The 18” D-Ring Extender becomes the new connection point to the harness
• Just connect your lanyard to the O-Ring on the extension and you’re all set
• Consists of strong polyester fabric and galvanized steel hardware for long-lasting protection
• Minimum tensile breaking strength of 5,000 pounds (22.2 kN)
• ANSI rated for 130-310 pounds, including equipment and clothing
• Offers significant fall protection
• This safety harness extender is not appropriate for use in leading-edge/foot-level tie-off applications
• It makes a great complement to our safety harnesses and harness accessories

The Malta Dynamics D-Ring extension can improve ease of use for fall arrest and fall restraint systems, allowing for quick attachment and release when needed. It is only intended for these two applications and is not suitable for work positioning, suspension or rescue.

Things to Know Before Using a D-Ring Extension

Lanyard and retractable extenders can be a valuable part of a fall or restraint system, but only if used appropriately. As with most pieces of equipment, you'll need to thoroughly inspect the safety harness D-Ring extension for any damage, excessive wear or soiling from contaminants. Ensure all hardware works correctly and that the snap hook gate can stay closed and locked. Webbing must be free of cuts, fraying and wear.

Here are a few other things to keep in mind when using safety harness extenders:

• Training: All employees using the D-Ring extender or other fall protection systems must be trained for appropriate use by a Competent Person as defined by OSHA.
• Free fall distance: Remember to factor in the extender's length when calculating fall clearance. The D-Ring extension will increase a user's potential free fall distance and will need to be included in calculations regarding deceleration distance and connecting subsystems length.
• Arrest forces: When used in a Personal Fall Arrest System (PFAS), the D-Ring extenders should be employed with other components that limit maximum arrest forces to 1,800 pounds (8 kN) or less. For fall restraint systems, the D-Ring extension can help prevent workers from reaching a hazard but should not be used for vertical free fall.
• Falls on the worksite: Remove the equipment from service if a fall occurs.
• Anchorage strength: Ensure anchorage strength requirements are met based on certification and application.
• Connector compatibility: Ensure all connectors used are compatible with the Malta Dynamics D-Ring Extender and your application. Avoid connecting multiple snap hooks or carabiners to one D-Ring. Other inappropriate connections include a snap hook connected to an integral lanyard or to a horizontal lifeline. See the product manual for more information on connections.

These points are general guidelines. Please read the user manual and any applicable standards for more comprehensive use instructions and information based on your application.